* USB 10/100 Ethernet Adapter. Download Corechip RD9700 USB2.0 To Fast Ethernet Adapter network card drivers or install DriverPack Solution software for driver update. This page contains the driver installation download for RD9700 USB2.0 To Fast Ethernet Adapter in supported models (Shift) that are running a supported operating. Realtek USB 2.0 Fast Ethernet 10/100M Controller Driver 10.17 for Windows 10 Realtek USB 2.0 Fast Ethernet 10/100M Controller Driver 8.37 for Windows 8 Realtek USB 2.0 Fast Ethernet 10/100M.

1. Windows 10 Usb Tool
2. Iphone Usb Ethernet Driver Windows 10

I recently needed an Ethernet adapter for my laptop, which has USB and WiFi (of course) but no Ethernet. Somebody offered me an Apple USB-to-Ethernet adapter. I figured Windows would offer the driver automatically, after which I could use the computer in places where only wired networks were available.

Well, I plugged it in, and no such luck! Windows 10 Enterprise x64 recognized the hardware, but said it couldn't find a driver for it. I tried searching online (connected over Wi-Fi), and found a bunch of people referencing this page by somebody using the alias “Tnkgrl.” Unfortunately, the DropBox download link is no longer pointing to anything! I also searched Apple’s site, but couldn’t find any Windows drivers: Maybe they’re included in Bootcamp but not available for download?.

Anybody know how to get this device working in Windows?

4 Answers

I did a little more hunting online and found this link to a blog that said they'd found the driver for the chipset in the adapter, and convinced it to work. I followed a variant on their instructions, and it worked for me too. Here are the steps I used:

1. Plug in the adapter while the computer is running.
2. Check Device Manager (you can get there by right-clicking Start). You should see a listed Apple device with a little yellow exclamation mark next to it, saying Windows can't load the driver.
3. Go to the website listed in the blog post and find the driver for your OS. I used this one for 64-bit Windows 10. Note that this is the actual driver download, not a Setup program.
4. Download the .ZIP file. If you use a browser that adds the 'mark of the web' (IE or Edge for sure, maybe others), right-click the downloaded ZIP, go to Properties, click Unblock (either a button or checkbox), and hit OK.
5. Unpack the ZIP archive. You should see a folder containing four files: a .SYS file (the driver), a .CAT file (the WHQL signature), a .INF file (the driver information), and a Readme.txt. Don't do anything with these files directly, but remember where they are.
6. Go back to Device Manager, right-click the device entry that needs the driver, and choose Update Driver Software...
7. Choose Browse my computer for driver software.
8. Choose Let me pick from a list of device drivers on my computer.
9. If there's a Have Disk.. button in the lower right, click it. Otherwise, click the top entry in the list (should be something like 'All devices') and hit OK, then click Have Disk.. on the next screen.
10. In the box labeled 'Copy manufacturer's files from:', type in or browse to the location where you unpacked the .ZIP file, then hit OK.
11. Choose the option ASIX AX88772A USB2.0 to Fast Ethernet Adapter (on my system, it is the second option listed). Hit Next.
12. You will get an 'Update Driver Warning' or similar saying that Windows can't verify that the driver will work with your hardware, which may cause problems. Click 'Yes' anyhow, for this and any other prompts to confirm that you want to install the driver.
13. You should now have a working Ethernet adapter! In Device Manager, it will be listed as a 'ASIX AX88772A USB2.0 to Fast Ethernet Adapter' under the 'Network adapters' category, and there should be no exclamation marks or anything like that.

There you go! You can connect to a wired network, and it should work fine. The original instructions were for Windows 8 x64, and I can verify that it works on Win10 x64; I haven't tested it on other versions but the same steps should work and the download site lists drivers for tons of operating systems.

Windows 10 Usb Tool

If you prefer to download the driver directly from Apple's site:

Iphone Usb Ethernet Driver Windows 10

1. Download the latest version of 'Boot Camp Support Software' from Apple.com: http://support.apple.com/downloads/#macoscomponents
2. Open the ZIP file and go into the BootCampDriversAsix driver
3. Run the AsixSetup64.exe driver installer

From Microsoft

search the windows update catalogWindows update catalog for ax88772

and get the driver from them.

Download the cab, extract it and install it using the device manager.It doesn't matter which 'name' you select - you get an warning that the driver will not fit - but they all work.

From Apple

Download the update catalog file using the official links:

eg. https://swscan.apple.com/content/catalogs/others/index-10.13seed-10.13-10.12-10.11-10.10-10.9-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog.gz

Pokemon dark violet walkthrough. Extract the xml file and open it in notepad++

Search for 'BootCampESD.pkg' (CTRL+F) and you will find many of them.

In the search result window double click the latest one and download the full url to the BootCampESD.pkg

As of writing the newest one was:http://swcdn.apple.com/content/downloads/41/17/091-14331/br9prfd71k86fkwgx421ept2s931s0bv2p/BootCampESD.pkg

Extract the *.pkg using 7-Zip:BootCampESD.pkgPayload~.LibraryApplication SupportBootCampWindowsSupport.dmg

Extract the *.dmg also with 7-zip: WindowsSupport.dmgBootCampDriversAsixAsixSetup64.exe

Extract the *.exe (rarsfx) again with 7-zip and you get the plain driver:

And yes, it still works also on Windows 10 x64

I have extrected the drivers form the 263MB 'Boot Camp Support Software':http://kom.aau.dk/~pmr/www/stuff/AsixSetup64.zip

Not the answer you're looking for? Browse other questions tagged windowsusbdriversethernet or ask your own question.